Skip navigation
Design & technology

Ready-to-run input decks

Ready-to-run input decks are material files which contain all necessary material data on a specific grade that can be directly used within CAE software for simulations on:

Forming:

  • AutoForm: Hill'48, BBC 2005
  • PAM-STAMP: Hill'48, Corus-Vegter, Corus-Vegter-lite

Crash:

  • PAM-CRASH: model 107, Corus-Vegter
  • LS-Dyna Crash: model mat 24
  • Radioss Crash
  • Abaqus Crash

For a particular specification the production process always creates a product with a spread of mechanical properties.  Aurora aims to provide data sets which are representative of the actual product properties, rather than the specification limits. 

These data sets can be tuned to represent typical or least formable properties of the product, depending on the customer requirements.  Within simulations this can be a very powerful tool.

 

Ready-to-run imput decks

 

 

Download example of R2R input desk for typical formable - HCT600X+Z
Autoform v4.1 Hill'48ACAD3 KB   
Autoform v4.1 BBC 2005ACAD3 KB   
PAM-STAMP 2G v1.2.A Hill'48ACAD5 KB   
PAM-STAMP 2G v1.2.A Vegter + Tensile CurveACAD5 KB   
PAM-STAMP 2G v1.2.A Vegter + SRSACAD42 KB   
PAM-STAMP 2G v.1.2.A Vegter-Lite + SRSACAD21 KB   
Download example of R2R Input deck for crash - HCT600X+Z
PAM-CRASH 2 G Crash Model Type 107ACAD30 KB   
PAM-CRASH 2 G Vegter + SRS Crash Model Type 109ACAD30 KB   
LS-Dyna Crash Model Type mat 24ACAD25 KB   
Radioss CrashACAD21 KB   
Abaqus CrashACAD21 KB